And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.417
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.150
And
I accept adding "cowsay" to Additional Software
3.657
And
Additional Software is correctly configured for package "cowsay"
0.549
And
I shutdown Tails and wait for the computer to power off
7.915
And
I start Tails from USB drive "__internal" with network unplugged
34.321
And
I enable persistence
5.416
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.713
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.293
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.014
And
available upgrades have been checked
3.230
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.447
And
I can open the Additional Software configuration window from the notification
2.493
And
I shutdown Tails and wait for the computer to power off
16.982
And
I start Tails from USB drive "__internal" with network unplugged
34.413
And
I enable persistence
5.244
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.908
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.306
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.132
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057