And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.519
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.609
And
I accept adding "cowsay" to Additional Software
3.638
And
Additional Software is correctly configured for package "cowsay"
0.698
And
I shutdown Tails and wait for the computer to power off
7.969
And
I start Tails from USB drive "__internal" with network unplugged
34.841
And
I enable persistence
5.467
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
8.910
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.350
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.016
And
available upgrades have been checked
0.026
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.454
And
I can open the Additional Software configuration window from the notification
2.511
And
I shutdown Tails and wait for the computer to power off
22.016
And
I start Tails from USB drive "__internal" with network unplugged
34.129
And
I enable persistence
5.387
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.538
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.351
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.099
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064