And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.713
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.411
And
I accept adding "cowsay" to Additional Software
3.666
And
Additional Software is correctly configured for package "cowsay"
0.573
And
I shutdown Tails and wait for the computer to power off
4.355
And
I start Tails from USB drive "__internal" with network unplugged
34.190
And
I enable persistence
5.551
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.039
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.321
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.017
And
available upgrades have been checked
3.202
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.401
And
I can open the Additional Software configuration window from the notification
2.495
And
I shutdown Tails and wait for the computer to power off
22.286
And
I start Tails from USB drive "__internal" with network unplugged
34.783
And
I enable persistence
6.389
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.903
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.247
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.129
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066