And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.799
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.577
And
I accept adding "cowsay" to Additional Software
3.677
And
Additional Software is correctly configured for package "cowsay"
0.661
And
I shutdown Tails and wait for the computer to power off
7.780
And
I start Tails from USB drive "__internal" with network unplugged
34.350
And
I enable persistence
5.326
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
9.358
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.442
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.016
And
available upgrades have been checked
1.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.497
And
I can open the Additional Software configuration window from the notification
2.551
And
I shutdown Tails and wait for the computer to power off
16.978
And
I start Tails from USB drive "__internal" with network unplugged
34.188
And
I enable persistence
5.408
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.889
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.348
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.118
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058