And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:36.383
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.912
And
I accept adding "cowsay" to Additional Software
4.057
And
Additional Software is correctly configured for package "cowsay"
0.987
And
I shutdown Tails and wait for the computer to power off
3.066
And
I start Tails from USB drive "__internal" with network unplugged
40.751
And
I enable persistence
8.516
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
12.275
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.447
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.092
And
the network is plugged
0.052
And
available upgrades have been checked
0.048
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.312
And
I can open the Additional Software configuration window from the notification
2.756
And
I shutdown Tails and wait for the computer to power off
17.044
And
I start Tails from USB drive "__internal" with network unplugged
41.227
And
I enable persistence
7.746
And
I configure APT to prefer an old version of cowsay
0.019
And
I log in to a new session
11.820
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.306
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.081
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.187
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062