And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:36.474
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.334
And
I accept adding "cowsay" to Additional Software
5.979
And
Additional Software is correctly configured for package "cowsay"
1.211
And
I shutdown Tails and wait for the computer to power off
7.902
And
I start Tails from USB drive "__internal" with network unplugged
46.100
And
I enable persistence
9.269
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
12.727
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.448
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.056
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.677
And
I can open the Additional Software configuration window from the notification
2.974
And
I shutdown Tails and wait for the computer to power off
23.307
And
I start Tails from USB drive "__internal" with network unplugged
44.524
And
I enable persistence
10.117
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
13.004
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
20.628
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.172
And
the network is plugged
0.153
Then
the Additional Software upgrade service has started
0.182
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078