And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:42.803
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
13.396
And
I accept adding "cowsay" to Additional Software
5.633
And
Additional Software is correctly configured for package "cowsay"
0.724
And
I shutdown Tails and wait for the computer to power off
8.163
And
I start Tails from USB drive "__internal" with network unplugged
45.058
And
I enable persistence
7.826
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.071
And
I log in to a new session
17.859
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.104
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.096
And
available upgrades have been checked
0.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.698
And
I can open the Additional Software configuration window from the notification
2.770
And
I shutdown Tails and wait for the computer to power off
2:3.420
And
I start Tails from USB drive "__internal" with network unplugged
43.776
And
I enable persistence
10.283
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
14.927
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.527
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.161
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081