And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:35.096
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.010
And
I accept adding "cowsay" to Additional Software
4.290
And
Additional Software is correctly configured for package "cowsay"
0.706
And
I shutdown Tails and wait for the computer to power off
7.949
And
I start Tails from USB drive "__internal" with network unplugged
41.496
And
I enable persistence
8.065
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
12.847
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.374
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.061
And
available upgrades have been checked
1.112
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.409
And
I can open the Additional Software configuration window from the notification
2.855
And
I shutdown Tails and wait for the computer to power off
13.557
And
I start Tails from USB drive "__internal" with network unplugged
44.623
And
I enable persistence
7.675
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
12.149
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.743
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.046
Then
the Additional Software upgrade service has started
0.150
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085