And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:33.927
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.806
And
I accept adding "cowsay" to Additional Software
5.489
And
Additional Software is correctly configured for package "cowsay"
0.690
And
I shutdown Tails and wait for the computer to power off
9.528
And
I start Tails from USB drive "__internal" with network unplugged
47.597
And
I enable persistence
7.849
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
14.305
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.421
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.087
And
available upgrades have been checked
0.092
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.394
And
I can open the Additional Software configuration window from the notification
2.806
And
I shutdown Tails and wait for the computer to power off
8.001
And
I start Tails from USB drive "__internal" with network unplugged
44.770
And
I enable persistence
10.796
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
14.526
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.417
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.082
And
the network is plugged
0.054
Then
the Additional Software upgrade service has started
0.150
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064