And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:49.438
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.887
And
I accept adding "cowsay" to Additional Software
5.534
And
Additional Software is correctly configured for package "cowsay"
0.740
And
I shutdown Tails and wait for the computer to power off
9.900
And
I start Tails from USB drive "__internal" with network unplugged
45.567
And
I enable persistence
15.717
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
16.041
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.387
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.087
And
the network is plugged
0.054
And
available upgrades have been checked
0.070
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.925
And
I can open the Additional Software configuration window from the notification
2.676
And
I shutdown Tails and wait for the computer to power off
18.189
And
I start Tails from USB drive "__internal" with network unplugged
52.468
And
I enable persistence
9.869
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
16.449
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.328
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.072
Then
the Additional Software upgrade service has started
0.225
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082