And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:33.567
And
I configure APT to prefer an old version of cowsay
0.019
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.962
And
I accept adding "cowsay" to Additional Software
6.852
And
Additional Software is correctly configured for package "cowsay"
0.812
And
I shutdown Tails and wait for the computer to power off
8.804
And
I start Tails from USB drive "__internal" with network unplugged
45.296
And
I enable persistence
7.696
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
13.898
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.326
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.056
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.552
And
I can open the Additional Software configuration window from the notification
3.374
And
I shutdown Tails and wait for the computer to power off
22.492
And
I start Tails from USB drive "__internal" with network unplugged
45.393
And
I enable persistence
7.641
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
15.188
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.378
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.061
Then
the Additional Software upgrade service has started
0.216
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077