And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:32.662
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.771
And
I accept adding "cowsay" to Additional Software
5.535
And
Additional Software is correctly configured for package "cowsay"
0.790
And
I shutdown Tails and wait for the computer to power off
7.658
And
I start Tails from USB drive "__internal" with network unplugged
43.037
And
I enable persistence
9.476
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.128
And
I log in to a new session
12.836
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.457
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.081
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.518
And
I can open the Additional Software configuration window from the notification
2.774
And
I shutdown Tails and wait for the computer to power off
23.207
And
I start Tails from USB drive "__internal" with network unplugged
43.727
And
I enable persistence
9.331
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
13.248
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.342
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.671
Then
the Additional Software upgrade service has started
0.304
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088