And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:33.250
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.513
And
I accept adding "cowsay" to Additional Software
5.657
And
Additional Software is correctly configured for package "cowsay"
0.732
And
I shutdown Tails and wait for the computer to power off
7.659
And
I start Tails from USB drive "__internal" with network unplugged
43.934
And
I enable persistence
9.872
And
I configure APT to prefer an old version of cowsay
0.065
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
13.181
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.445
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.057
And
available upgrades have been checked
0.058
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.948
And
I can open the Additional Software configuration window from the notification
2.814
And
I shutdown Tails and wait for the computer to power off
23.258
And
I start Tails from USB drive "__internal" with network unplugged
43.060
And
I enable persistence
9.685
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
13.191
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.442
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.058
Then
the Additional Software upgrade service has started
0.197
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085