And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:43.674
And
I configure APT to prefer an old version of cowsay
0.067
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
10.207
And
I accept adding "cowsay" to Additional Software
6.218
And
Additional Software is correctly configured for package "cowsay"
1.067
And
I shutdown Tails and wait for the computer to power off
8.462
And
I start Tails from USB drive "__internal" with network unplugged
44.223
And
I enable persistence
10.952
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.072
And
I log in to a new session
16.235
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.050
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.057
And
available upgrades have been checked
0.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.487
And
I can open the Additional Software configuration window from the notification
2.827
And
I shutdown Tails and wait for the computer to power off
22.095
And
I start Tails from USB drive "__internal" with network unplugged
46.188
And
I enable persistence
9.333
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
15.915
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.526
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.129
And
the network is plugged
0.112
Then
the Additional Software upgrade service has started
0.218
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.105