And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:33.624
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.383
And
I accept adding "cowsay" to Additional Software
5.773
And
Additional Software is correctly configured for package "cowsay"
0.720
And
I shutdown Tails and wait for the computer to power off
7.806
And
I start Tails from USB drive "__internal" with network unplugged
43.891
And
I enable persistence
8.946
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
13.461
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.390
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.051
And
available upgrades have been checked
0.063
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.006
And
I can open the Additional Software configuration window from the notification
2.743
And
I shutdown Tails and wait for the computer to power off
23.127
And
I start Tails from USB drive "__internal" with network unplugged
44.572
And
I enable persistence
7.778
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
16.147
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.366
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.090
Then
the Additional Software upgrade service has started
0.135
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089