And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:9.269
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.720
And
I accept adding "cowsay" to Additional Software
5.889
And
Additional Software is correctly configured for package "cowsay"
1.112
And
I shutdown Tails and wait for the computer to power off
4.972
And
I start Tails from USB drive "__internal" with network unplugged
44.037
And
I enable persistence
9.692
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
15.075
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.455
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.052
And
available upgrades have been checked
0.197
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.438
And
I can open the Additional Software configuration window from the notification
2.842
And
I shutdown Tails and wait for the computer to power off
19.236
And
I start Tails from USB drive "__internal" with network unplugged
45.024
And
I enable persistence
11.275
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
14.587
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.900
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.092
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100