And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:35.715
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.057
And
I accept adding "cowsay" to Additional Software
5.719
And
Additional Software is correctly configured for package "cowsay"
1.357
And
I shutdown Tails and wait for the computer to power off
8.011
And
I start Tails from USB drive "__internal" with network unplugged
45.087
And
I enable persistence
10.091
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
14.573
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.920
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.120
And
the network is plugged
0.052
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.476
And
I can open the Additional Software configuration window from the notification
2.824
And
I shutdown Tails and wait for the computer to power off
19.208
And
I start Tails from USB drive "__internal" with network unplugged
49.237
And
I enable persistence
22.339
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
17.688
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
24.951
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
4.289
Then
the Additional Software upgrade service has started
0.206
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075