And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:38.001
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.163
And
I accept adding "cowsay" to Additional Software
5.382
And
Additional Software is correctly configured for package "cowsay"
1.149
And
I shutdown Tails and wait for the computer to power off
7.996
And
I start Tails from USB drive "__internal" with network unplugged
44.132
And
I enable persistence
16.860
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
13.885
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.434
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.053
And
available upgrades have been checked
0.051
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.567
And
I can open the Additional Software configuration window from the notification
2.669
And
I shutdown Tails and wait for the computer to power off
22.183
And
I start Tails from USB drive "__internal" with network unplugged
44.403
And
I enable persistence
9.217
And
I configure APT to prefer an old version of cowsay
0.038
And
I log in to a new session
12.985
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.506
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.246
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080