And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:40.176
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.577
And
I accept adding "cowsay" to Additional Software
5.927
And
Additional Software is correctly configured for package "cowsay"
0.720
And
I shutdown Tails and wait for the computer to power off
3.492
And
I start Tails from USB drive "__internal" with network unplugged
45.728
And
I enable persistence
9.278
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.118
And
I log in to a new session
13.538
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.373
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.068
And
available upgrades have been checked
1.227
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.428
And
I can open the Additional Software configuration window from the notification
3.048
And
I shutdown Tails and wait for the computer to power off
18.059
And
I start Tails from USB drive "__internal" with network unplugged
45.368
And
I enable persistence
9.230
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
12.889
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
20.915
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
the network is plugged
0.079
Then
the Additional Software upgrade service has started
0.311
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.190