And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:40.051
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.572
And
I accept adding "cowsay" to Additional Software
5.781
And
Additional Software is correctly configured for package "cowsay"
0.767
And
I shutdown Tails and wait for the computer to power off
3.078
And
I start Tails from USB drive "__internal" with network unplugged
43.465
And
I enable persistence
9.815
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.071
And
I log in to a new session
12.020
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.759
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.066
And
available upgrades have been checked
0.080
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.781
And
I can open the Additional Software configuration window from the notification
2.854
And
I shutdown Tails and wait for the computer to power off
2:8.421
And
I start Tails from USB drive "__internal" with network unplugged
42.837
And
I enable persistence
7.842
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
13.230
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.427
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.165
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091