And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:36.017
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.064
And
I accept adding "cowsay" to Additional Software
7.136
And
Additional Software is correctly configured for package "cowsay"
0.710
And
I shutdown Tails and wait for the computer to power off
8.932
And
I start Tails from USB drive "__internal" with network unplugged
45.935
And
I enable persistence
8.336
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
14.401
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.416
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.132
And
the network is plugged
0.072
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.009
And
I can open the Additional Software configuration window from the notification
2.912
And
I shutdown Tails and wait for the computer to power off
18.316
And
I start Tails from USB drive "__internal" with network unplugged
48.208
And
I enable persistence
7.652
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
13.741
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.516
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.105
And
the network is plugged
0.070
Then
the Additional Software upgrade service has started
0.233
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085