And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.701
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.921
And
I accept adding "cowsay" to Additional Software
6.088
And
Additional Software is correctly configured for package "cowsay"
0.837
And
I shutdown Tails and wait for the computer to power off
7.558
And
I start Tails from USB drive "__internal" with network unplugged
1:6.391
And
I enable persistence
9.410
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.095
And
I log in to a new session
13.030
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.407
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.049
And
available upgrades have been checked
0.073
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.311
And
I can open the Additional Software configuration window from the notification
2.767
And
I shutdown Tails and wait for the computer to power off
17.744
And
I start Tails from USB drive "__internal" with network unplugged
1:5.263
And
I enable persistence
9.976
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
13.896
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.858
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.059
Then
the Additional Software upgrade service has started
0.147
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075