And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:53.192
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.764
And
I accept adding "cowsay" to Additional Software
5.349
And
Additional Software is correctly configured for package "cowsay"
0.736
And
I shutdown Tails and wait for the computer to power off
7.688
And
I start Tails from USB drive "__internal" with network unplugged
1:4.853
And
I enable persistence
7.625
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.083
And
I log in to a new session
12.666
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.397
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.051
And
available upgrades have been checked
0.044
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.846
And
I can open the Additional Software configuration window from the notification
2.831
And
I shutdown Tails and wait for the computer to power off
23.183
And
I start Tails from USB drive "__internal" with network unplugged
1:5.933
And
I enable persistence
21.684
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
12.909
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.380
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.055
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082