And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:0.131
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.634
And
I accept adding "cowsay" to Additional Software
5.691
And
Additional Software is correctly configured for package "cowsay"
0.868
And
I shutdown Tails and wait for the computer to power off
7.650
And
I start Tails from USB drive "__internal" with network unplugged
1:7.239
And
I enable persistence
9.308
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
14.954
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.342
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
I prepare the Additional Software upgrade process to fail
0.080
And
the network is plugged
0.101
And
available upgrades have been checked
0.052
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.436
And
I can open the Additional Software configuration window from the notification
3.691
And
I shutdown Tails and wait for the computer to power off
17.560
And
I start Tails from USB drive "__internal" with network unplugged
1:8.051
And
I enable persistence
7.711
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
14.755
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.603
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.133
Then
the Additional Software upgrade service has started
0.150
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076