And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:55.762
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.231
And
I accept adding "cowsay" to Additional Software
5.856
And
Additional Software is correctly configured for package "cowsay"
0.779
And
I shutdown Tails and wait for the computer to power off
7.781
And
I start Tails from USB drive "__internal" with network unplugged
1:5.425
And
I enable persistence
9.412
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
12.578
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.811
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.087
And
the network is plugged
0.085
And
available upgrades have been checked
0.088
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.770
And
I can open the Additional Software configuration window from the notification
3.059
And
I shutdown Tails and wait for the computer to power off
18.740
And
I start Tails from USB drive "__internal" with network unplugged
1:6.338
And
I enable persistence
9.467
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
12.094
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
20.521
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.067
Then
the Additional Software upgrade service has started
0.186
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.106