And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:44.197
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.414
And
I accept adding "cowsay" to Additional Software
5.452
And
Additional Software is correctly configured for package "cowsay"
0.710
And
I shutdown Tails and wait for the computer to power off
8.208
And
I start Tails from USB drive "__internal" with network unplugged
1:5.048
And
I enable persistence
7.937
And
I configure APT to prefer an old version of cowsay
0.039
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
12.794
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.386
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
3.149
And
available upgrades have been checked
1.162
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.496
And
I can open the Additional Software configuration window from the notification
2.825
And
I shutdown Tails and wait for the computer to power off
19.682
And
I start Tails from USB drive "__internal" with network unplugged
1:4.908
And
I enable persistence
10.617
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
14.682
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.399
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.056
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077