And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:56.799
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.600
And
I accept adding "cowsay" to Additional Software
5.770
And
Additional Software is correctly configured for package "cowsay"
0.733
And
I shutdown Tails and wait for the computer to power off
8.133
And
I start Tails from USB drive "__internal" with network unplugged
1:6.636
And
I enable persistence
8.119
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
13.606
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.427
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.055
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.284
And
I can open the Additional Software configuration window from the notification
2.862
And
I shutdown Tails and wait for the computer to power off
17.410
And
I start Tails from USB drive "__internal" with network unplugged
1:5.890
And
I enable persistence
9.343
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
13.588
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.506
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.057
Then
the Additional Software upgrade service has started
0.189
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.108