And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:58.697
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.411
And
I accept adding "cowsay" to Additional Software
6.409
And
Additional Software is correctly configured for package "cowsay"
0.768
And
I shutdown Tails and wait for the computer to power off
3.280
And
I start Tails from USB drive "__internal" with network unplugged
1:6.404
And
I enable persistence
8.740
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
12.708
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.417
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.104
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.512
And
I can open the Additional Software configuration window from the notification
2.920
And
I shutdown Tails and wait for the computer to power off
18.025
And
I start Tails from USB drive "__internal" with network unplugged
1:7.251
And
I enable persistence
6.876
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
13.885
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.739
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.087
Then
the Additional Software upgrade service has started
0.186
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075