And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:56.261
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.435
And
I accept adding "cowsay" to Additional Software
5.617
And
Additional Software is correctly configured for package "cowsay"
0.782
And
I shutdown Tails and wait for the computer to power off
3.228
And
I start Tails from USB drive "__internal" with network unplugged
1:7.804
And
I enable persistence
9.234
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
12.614
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.295
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.050
And
available upgrades have been checked
0.053
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.315
And
I can open the Additional Software configuration window from the notification
2.705
And
I shutdown Tails and wait for the computer to power off
2:2.331
And
I start Tails from USB drive "__internal" with network unplugged
1:5.082
And
I enable persistence
8.896
And
I configure APT to prefer an old version of cowsay
0.019
And
I log in to a new session
11.469
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.396
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.059
Then
the Additional Software upgrade service has started
0.144
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067