And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:50.429
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.809
And
I accept adding "cowsay" to Additional Software
5.563
And
Additional Software is correctly configured for package "cowsay"
0.763
And
I shutdown Tails and wait for the computer to power off
23.079
And
I start Tails from USB drive "__internal" with network unplugged
1:5.189
And
I enable persistence
8.669
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
13.137
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.348
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.050
And
available upgrades have been checked
0.059
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.155
And
I can open the Additional Software configuration window from the notification
2.723
And
I shutdown Tails and wait for the computer to power off
12.314
And
I start Tails from USB drive "__internal" with network unplugged
1:3.639
And
I enable persistence
7.852
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
13.195
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.389
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.052
Then
the Additional Software upgrade service has started
0.160
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078