And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:50.528
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.576
And
I accept adding "cowsay" to Additional Software
8.511
And
Additional Software is correctly configured for package "cowsay"
0.708
And
I shutdown Tails and wait for the computer to power off
7.548
And
I start Tails from USB drive "__internal" with network unplugged
1:3.976
And
I enable persistence
17.673
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
13.613
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.425
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
3.288
And
available upgrades have been checked
0.048
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.668
And
I can open the Additional Software configuration window from the notification
2.966
And
I shutdown Tails and wait for the computer to power off
2:10.129
And
I start Tails from USB drive "__internal" with network unplugged
1:12.879
And
I enable persistence
9.251
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
12.458
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
21.945
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.151
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075