And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:50.157
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.660
And
I accept adding "cowsay" to Additional Software
5.535
And
Additional Software is correctly configured for package "cowsay"
0.724
And
I shutdown Tails and wait for the computer to power off
7.468
And
I start Tails from USB drive "__internal" with network unplugged
1:4.092
And
I enable persistence
8.019
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
13.168
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.358
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.054
And
available upgrades have been checked
0.051
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.609
And
I can open the Additional Software configuration window from the notification
2.759
And
I shutdown Tails and wait for the computer to power off
2:7.423
And
I start Tails from USB drive "__internal" with network unplugged
1:3.750
And
I enable persistence
6.802
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
12.599
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.344
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.055
Then
the Additional Software upgrade service has started
0.174
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061