And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:56.301
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.271
And
I accept adding "cowsay" to Additional Software
5.430
And
Additional Software is correctly configured for package "cowsay"
0.728
And
I shutdown Tails and wait for the computer to power off
8.296
And
I start Tails from USB drive "__internal" with network unplugged
1:7.048
And
I enable persistence
9.595
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
12.835
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.892
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
3.080
And
available upgrades have been checked
0.043
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.803
And
I can open the Additional Software configuration window from the notification
2.728
And
I shutdown Tails and wait for the computer to power off
17.889
And
I start Tails from USB drive "__internal" with network unplugged
1:6.447
And
I enable persistence
10.667
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
12.387
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
20.505
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.123
Then
the Additional Software upgrade service has started
0.153
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088