And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:49.264
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.945
And
I accept adding "cowsay" to Additional Software
5.578
And
Additional Software is correctly configured for package "cowsay"
0.711
And
I shutdown Tails and wait for the computer to power off
7.736
And
I start Tails from USB drive "__internal" with network unplugged
1:3.951
And
I enable persistence
7.997
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
11.606
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.415
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.048
And
available upgrades have been checked
0.048
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.408
And
I can open the Additional Software configuration window from the notification
3.298
And
I shutdown Tails and wait for the computer to power off
18.658
And
I start Tails from USB drive "__internal" with network unplugged
1:4.579
And
I enable persistence
8.178
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
13.540
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.388
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.190
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.093