And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:54.503
And
I configure APT to prefer an old version of cowsay
0.019
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.772
And
I accept adding "cowsay" to Additional Software
5.377
And
Additional Software is correctly configured for package "cowsay"
0.786
And
I shutdown Tails and wait for the computer to power off
8.477
And
I start Tails from USB drive "__internal" with network unplugged
1:4.420
And
I enable persistence
7.955
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
12.289
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.399
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.102
And
I prepare the Additional Software upgrade process to fail
0.085
And
the network is plugged
0.092
And
available upgrades have been checked
0.069
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.912
And
I can open the Additional Software configuration window from the notification
2.923
And
I shutdown Tails and wait for the computer to power off
18.332
And
I start Tails from USB drive "__internal" with network unplugged
1:4.356
And
I enable persistence
7.765
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
14.779
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.326
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.070
Then
the Additional Software upgrade service has started
0.184
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.093