And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:22.393
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.574
And
I accept adding "cowsay" to Additional Software
5.488
And
Additional Software is correctly configured for package "cowsay"
0.780
And
I shutdown Tails and wait for the computer to power off
3.176
And
I start Tails from USB drive "__internal" with network unplugged
1:5.857
And
I enable persistence
8.159
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
13.158
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.446
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.074
And
I prepare the Additional Software upgrade process to fail
0.114
And
the network is plugged
0.056
And
available upgrades have been checked
0.059
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.229
And
I can open the Additional Software configuration window from the notification
2.756
And
I shutdown Tails and wait for the computer to power off
17.114
And
I start Tails from USB drive "__internal" with network unplugged
1:4.242
And
I enable persistence
9.511
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
13.640
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.553
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.063
Then
the Additional Software upgrade service has started
0.150
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068