And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:51.890
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.752
And
I accept adding "cowsay" to Additional Software
5.892
And
Additional Software is correctly configured for package "cowsay"
0.806
And
I shutdown Tails and wait for the computer to power off
4.898
And
I start Tails from USB drive "__internal" with network unplugged
1:4.504
And
I enable persistence
7.855
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
11.809
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.397
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.110
And
I prepare the Additional Software upgrade process to fail
0.066
And
the network is plugged
0.055
And
available upgrades have been checked
0.071
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.681
And
I can open the Additional Software configuration window from the notification
2.742
And
I shutdown Tails and wait for the computer to power off
18.653
And
I start Tails from USB drive "__internal" with network unplugged
1:4.175
And
I enable persistence
7.529
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
13.197
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.309
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
the network is plugged
0.052
Then
the Additional Software upgrade service has started
0.148
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079