And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:56.170
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
11.271
And
I accept adding "cowsay" to Additional Software
6.929
And
Additional Software is correctly configured for package "cowsay"
0.862
And
I shutdown Tails and wait for the computer to power off
11.369
And
I start Tails from USB drive "__internal" with network unplugged
1:7.380
And
I enable persistence
7.908
And
I configure APT to prefer an old version of cowsay
0.036
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
14.261
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.518
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.140
And
I prepare the Additional Software upgrade process to fail
0.257
And
the network is plugged
0.440
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.723
And
I can open the Additional Software configuration window from the notification
2.963
And
I shutdown Tails and wait for the computer to power off
20.490
And
I start Tails from USB drive "__internal" with network unplugged
1:24.568
And
I enable persistence
39.287
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
17.383
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
25.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
18.113
Then
the Additional Software upgrade service has started
0.195
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074