And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:2.148
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.812
And
I accept adding "cowsay" to Additional Software
7.293
And
Additional Software is correctly configured for package "cowsay"
0.768
And
I shutdown Tails and wait for the computer to power off
7.813
And
I start Tails from USB drive "__internal" with network unplugged
1:7.495
And
I enable persistence
8.288
And
I configure APT to prefer an old version of cowsay
0.034
And
I disable the tails-virt-notify-user.service user unit
0.075
And
I log in to a new session
14.567
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.084
And
I prepare the Additional Software upgrade process to fail
0.214
And
the network is plugged
0.092
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.644
And
I can open the Additional Software configuration window from the notification
2.716
And
I shutdown Tails and wait for the computer to power off
3.136
And
I start Tails from USB drive "__internal" with network unplugged
1:7.715
And
I enable persistence
9.611
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
13.892
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.365
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.060
Then
the Additional Software upgrade service has started
0.310
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.120