And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:53.273
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.456
And
I accept adding "cowsay" to Additional Software
5.365
And
Additional Software is correctly configured for package "cowsay"
0.690
And
I shutdown Tails and wait for the computer to power off
7.522
And
I start Tails from USB drive "__internal" with network unplugged
1:4.707
And
I enable persistence
7.991
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
13.159
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.711
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.059
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.216
And
I can open the Additional Software configuration window from the notification
2.736
And
I shutdown Tails and wait for the computer to power off
12.539
And
I start Tails from USB drive "__internal" with network unplugged
1:6.242
And
I enable persistence
8.636
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
13.306
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.424
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.062
Then
the Additional Software upgrade service has started
0.181
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082