And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:2.666
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.302
And
I accept adding "cowsay" to Additional Software
5.473
And
Additional Software is correctly configured for package "cowsay"
0.752
And
I shutdown Tails and wait for the computer to power off
7.876
And
I start Tails from USB drive "__internal" with network unplugged
1:7.322
And
I enable persistence
9.886
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.085
And
I log in to a new session
12.836
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.385
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.066
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.919
And
I can open the Additional Software configuration window from the notification
6.304
And
I shutdown Tails and wait for the computer to power off
17.491
And
I start Tails from USB drive "__internal" with network unplugged
1:4.458
And
I enable persistence
7.952
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
13.457
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.354
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089