And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:52.149
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.025
And
I accept adding "cowsay" to Additional Software
5.460
And
Additional Software is correctly configured for package "cowsay"
0.667
And
I shutdown Tails and wait for the computer to power off
4.924
And
I start Tails from USB drive "__internal" with network unplugged
1:3.911
And
I enable persistence
7.827
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
12.510
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.363
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.055
And
available upgrades have been checked
0.070
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.369
And
I can open the Additional Software configuration window from the notification
3.268
And
I shutdown Tails and wait for the computer to power off
18.241
And
I start Tails from USB drive "__internal" with network unplugged
1:3.317
And
I enable persistence
7.824
And
I configure APT to prefer an old version of cowsay
0.019
And
I log in to a new session
12.014
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.288
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.054
Then
the Additional Software upgrade service has started
0.159
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069