And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:56.558
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.477
And
I accept adding "cowsay" to Additional Software
5.650
And
Additional Software is correctly configured for package "cowsay"
0.752
And
I shutdown Tails and wait for the computer to power off
8.684
And
I start Tails from USB drive "__internal" with network unplugged
1:7.387
And
I enable persistence
7.790
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
13.734
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.416
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.067
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.077
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.569
And
I can open the Additional Software configuration window from the notification
3.356
And
I shutdown Tails and wait for the computer to power off
13.998
And
I start Tails from USB drive "__internal" with network unplugged
1:6.561
And
I enable persistence
9.130
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
15.731
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.672
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.053
Then
the Additional Software upgrade service has started
0.228
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081