And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:57.236
And
I configure APT to prefer an old version of cowsay
0.019
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.354
And
I accept adding "cowsay" to Additional Software
4.138
And
Additional Software is correctly configured for package "cowsay"
0.886
And
I shutdown Tails and wait for the computer to power off
7.760
And
I start Tails from USB drive "__internal" with network unplugged
1:5.687
And
I enable persistence
8.051
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
11.728
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.888
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.082
And
available upgrades have been checked
0.051
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.954
And
I can open the Additional Software configuration window from the notification
2.842
And
I shutdown Tails and wait for the computer to power off
17.932
And
I start Tails from USB drive "__internal" with network unplugged
1:3.198
And
I enable persistence
6.768
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
12.727
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.373
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.055
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074