And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:0.598
And
I configure APT to prefer an old version of cowsay
0.037
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.646
And
I accept adding "cowsay" to Additional Software
6.171
And
Additional Software is correctly configured for package "cowsay"
0.813
And
I shutdown Tails and wait for the computer to power off
7.868
And
I start Tails from USB drive "__internal" with network unplugged
1:8.176
And
I enable persistence
9.407
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.072
And
I log in to a new session
13.931
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.475
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.080
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.054
And
available upgrades have been checked
0.054
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.673
And
I can open the Additional Software configuration window from the notification
2.812
And
I shutdown Tails and wait for the computer to power off
17.775
And
I start Tails from USB drive "__internal" with network unplugged
1:8.489
And
I enable persistence
9.902
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
16.192
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.501
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.112
And
the network is plugged
0.057
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083