And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:53.092
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.256
And
I accept adding "cowsay" to Additional Software
5.754
And
Additional Software is correctly configured for package "cowsay"
0.755
And
I shutdown Tails and wait for the computer to power off
7.474
And
I start Tails from USB drive "__internal" with network unplugged
1:4.545
And
I enable persistence
7.997
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
12.695
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.727
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.072
And
the network is plugged
0.066
And
available upgrades have been checked
0.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.078
And
I can open the Additional Software configuration window from the notification
2.769
And
I shutdown Tails and wait for the computer to power off
22.646
And
I start Tails from USB drive "__internal" with network unplugged
1:4.246
And
I enable persistence
8.054
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
13.299
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.328
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.078
Then
the Additional Software upgrade service has started
0.161
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075