And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:54.009
And
I configure APT to prefer an old version of cowsay
0.037
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.697
And
I accept adding "cowsay" to Additional Software
5.401
And
Additional Software is correctly configured for package "cowsay"
0.678
And
I shutdown Tails and wait for the computer to power off
7.535
And
I start Tails from USB drive "__internal" with network unplugged
1:4.546
And
I enable persistence
7.859
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
13.424
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.305
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.063
And
available upgrades have been checked
0.067
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.374
And
I can open the Additional Software configuration window from the notification
2.746
And
I shutdown Tails and wait for the computer to power off
12.460
And
I start Tails from USB drive "__internal" with network unplugged
1:3.480
And
I enable persistence
6.796
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
13.146
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.335
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
2.128
Then
the Additional Software upgrade service has started
0.175
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077