And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:52.047
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.258
And
I accept adding "cowsay" to Additional Software
3.996
And
Additional Software is correctly configured for package "cowsay"
0.715
And
I shutdown Tails and wait for the computer to power off
8.040
And
I start Tails from USB drive "__internal" with network unplugged
1:5.800
And
I enable persistence
8.167
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
12.418
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.345
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.070
And
available upgrades have been checked
1.144
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.280
And
I can open the Additional Software configuration window from the notification
2.843
And
I shutdown Tails and wait for the computer to power off
23.385
And
I start Tails from USB drive "__internal" with network unplugged
1:3.949
And
I enable persistence
7.723
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
13.313
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.375
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.058
Then
the Additional Software upgrade service has started
0.198
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074