And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:51.987
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.563
And
I accept adding "cowsay" to Additional Software
5.598
And
Additional Software is correctly configured for package "cowsay"
0.717
And
I shutdown Tails and wait for the computer to power off
7.988
And
I start Tails from USB drive "__internal" with network unplugged
1:3.679
And
I enable persistence
7.723
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
12.726
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.320
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.059
And
available upgrades have been checked
0.072
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.513
And
I can open the Additional Software configuration window from the notification
2.800
And
I shutdown Tails and wait for the computer to power off
12.274
And
I start Tails from USB drive "__internal" with network unplugged
1:4.152
And
I enable persistence
8.406
And
I configure APT to prefer an old version of cowsay
0.045
And
I log in to a new session
12.659
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.407
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.051
Then
the Additional Software upgrade service has started
0.147
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076