And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:53.391
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.465
And
I accept adding "cowsay" to Additional Software
5.343
And
Additional Software is correctly configured for package "cowsay"
0.673
And
I shutdown Tails and wait for the computer to power off
3.628
And
I start Tails from USB drive "__internal" with network unplugged
1:3.950
And
I enable persistence
7.580
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
12.286
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.354
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.060
And
available upgrades have been checked
0.081
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.519
And
I can open the Additional Software configuration window from the notification
2.884
And
I shutdown Tails and wait for the computer to power off
18.442
And
I start Tails from USB drive "__internal" with network unplugged
1:3.964
And
I enable persistence
8.497
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
12.661
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.707
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.071
Then
the Additional Software upgrade service has started
0.167
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070